Moulded zipper K5 4.5 mm ALPHA

About this item

ALPHA K5 moulded-tooth zipper: 26 ±1 mm tape width and 4.5 mm chain width. Lightweight fabric products; the end configuration determines suitability for garments, bags or covers.

Item identity

Use SKU k5 and item number 247 in the enquiry. Category: Sewing accessories / Zippers / Plastic (tractor).

ALPHA K5: construction and applications

ALPHA K5 moulded-tooth zipper: 26 ±1 mm tape width and 4.5 mm chain width. Lightweight fabric products; the end configuration determines suitability for garments, bags or covers. The 2018 standard slider reference is 23. Tape colour, slider and end configuration are separate ordering parameters.

Selecting the required execution

Tape width is the full textile width, while coil or tooth width refers to the closed chain. Specify the model, length, end configuration, tape colour and slider code. Equal nominal size does not guarantee slider compatibility between different series.

Colours and configuration availability

Select from the ALPHA colour card and a physical tape sample. The general manufacturer palette does not establish availability of every shade for every model. The 2018 catalogue data is identified by source date. Current website puller lists may differ; a manager will confirm the required combination. Select the shade using a physical sample, not a screen image alone.

Family decoration options

Decorative tapes: lurex 100040 green, 100050 gold, 100060 pink, 100070 blue, 100080 silver/white, 100090 red, 100110 silver/black. These are family options; confirm compatibility with the selected model when ordering. The moulded-tooth family includes multicolour teeth and silver, gold and titanium colour options; confirm the tooth/tape combination.

Pullers and custom decoration

The catalogue describes laser engraving on CNK, SCN, OKS, PAT, NFR, MOS and MBL finishes, pad printing on plastic and metal, raised or recessed cast logos, plastic shapes 301/305/350 and flexible gel pullers. NOMEKS and SATYNA tapes are also shown at family level, without blanket model compatibility. Confirm compatibility, quantities and availability; the NOMEKS name alone does not certify the finished product as flame resistant.

Order ALPHA K5 from DELIM

Add the product to your enquiry and specify model, length, colour or colour code, slider, end configuration and quantity. Request continuous chain by length and finished zippers by piece count. A manager will confirm stock, price, minimum order and lead time.

Key parameters

Product group: Plastic (tractor)
Size in product name: 4.5mm
Format: Zipper chain by the metre
Tape material: 100% polyester
Teeth / coil material: POM
Slider materials (catalogue): PVC, alloy ZnAl, Z410
Construction: Moulded-tooth zipper
Manufacturer: ALPHA TECHNOLOGY
Manufacturer model: K5
Tape width: 26 ±1 mm
Coil / tooth width: 4.5 mm
Chain material: POM

Verified specifications

Standard slider, 2018 catalogue: 23
Slider / puller materials: ZnAl Z410 / PVC
End configurations, 2018 catalogue: T — continuous chain without factory end stops; S — closed-end, one slider; R — separating; Rx2 — separating, two back-to-back sliders
Catalogue load class: light; qualitative classification, not a working load limit
Tape colours: Select from the ALPHA colour card and a physical tape sample. The general manufacturer palette does not establish availability of every shade for every model.
End-component materials: POM / ZnAl Z410
Decorative pullers, 2018 catalogue: 3, 4, 10, 15, 18, 19, 20, 22, 46, 69, 88, 100, 113, 114, 115, 117, 150, 167, 171, 177, 179, 183, 184, 203, 204, 216, 226, 301, 302, 303, 304, 305, 350
Catalogue length tolerances: Up to 25 cm: ±0.5 cm; 26–100 cm: ±1 cm; 101–500 cm: ±1%; 501 cm and above: ±5 cm. These are tolerances, not a list of available lengths.
Crosswise strength of the closed chain: 30/30 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
Separating connector attachment: 7/10 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
Closed-end stop strength: 5/7 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
Separating end strength: 9/10 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
Top-stop attachment: 7/14 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
Puller attachment: 10/19 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
Colour codes in DELIM item records: 100008, 100012, 110107, 110601, 130000, 132004, 135309, 140754, 141310, 141911, 144002, 144106, 144121, 145420, 150955, 151906, 154020, 160000, 161305, 161459, 161712, 163803, 163815, 164519, 165907, 171456, 180306, 180820, 181755, 184005, 184025, 190309, 190515, 191663, 191763, 191862, 193730, 194005, 194023, 194025, 194050, 194104, 194118. Recorded executions; this is not a stock availability statement.
Standard website pullers, 24 September 2026: 023
Decorative website pullers, 24 September 2026: 003, 004, 010, 015, 018, 019, 020, 022, 046, 069, 088, 100, 110, 113, 114, 115, 117, 146, 150, 171, 177, 179, 183, 184, 203, 204, 216, 301, 302, 303, 304, 305, 350
Website end configurations, 24 September 2026: T, S, R, Rx2
Website slider finish codes: CNK, LAK, MBL, MDZ, MOS, NFR, NIK, OKS, PAT, SCN
Slider finishes, 2018 catalogue: CNK dark nickel; LAK lacquer; MBL polished brass; MOS brass; NFR nickel free; OKS oxide; PAT patina; SCN antique tin; MDZ copper. General palette; confirm compatibility with the model.
Material: POM / Polyester
Size: 4.5 mm

Technical documents and drawings

Applications and compatibility

For mattresses.
For sleeping bags.
For pillows.
Lightweight fabric products; the end configuration determines suitability for garments, bags or covers.
Use compatible ALPHA sliders, chain and end components. Validate the sample in your own assembly before specifying production.