Metal zipper VT0 4.2 mm
SKU · vt0
- Product group: standard
- Material in product name: Metal
- Size in product name: 4.2mm
standard
About this item
Item identity
Use SKU vt0 and item number 250 in the enquiry. Category: Sewing accessories / Zippers / metal fasteners / standard.
ALPHA VT0: construction and applications
ALPHA VT0 metal zipper: 26 ±1 mm tape width and 4.2 mm chain width. Lightweight fabric products; the end configuration determines suitability for garments, bags or covers. The 2018 standard slider reference is 23. Tape colour, slider and end configuration are separate ordering parameters.
Selecting the required execution
Tape width is the full textile width, while coil or tooth width refers to the closed chain. Specify the model, length, end configuration, tape colour and slider code. Equal nominal size does not guarantee slider compatibility between different series.
Colours and configuration availability
Select from the ALPHA colour card and a physical tape sample. The general manufacturer palette does not establish availability of every shade for every model. The 2018 catalogue data is identified by source date. Current website puller lists may differ; a manager will confirm the required combination. Select the shade using a physical sample, not a screen image alone.
Family decoration options
Catalogue tooth finishes: MOS brass; OKS oxide; PMS patinated brass; NFR nickel free; NIK nickel; PNK patinated nickel; ALU aluminium; MDZ copper; MBL polished brass; NBL polished nickel; CNK dark nickel; COX dark oxide. A finish code does not change the M63 base material or constitute a separate certificate. Decorative tapes: lurex 100040 green, 100050 gold, 100060 pink, 100070 blue, 100080 silver/white, 100090 red, 100110 silver/black. These are family options; confirm compatibility with the selected model when ordering. Denim tapes: 264NIE blue, 265BIA white.
Pullers and custom decoration
The catalogue describes laser engraving on CNK, SCN, OKS, PAT, NFR, MOS and MBL finishes, pad printing on plastic and metal, raised or recessed cast logos, plastic shapes 301/305/350 and flexible gel pullers. NOMEKS and SATYNA tapes are also shown at family level, without blanket model compatibility. Confirm compatibility, quantities and availability; the NOMEKS name alone does not certify the finished product as flame resistant.
Order ALPHA VT0 from DELIM
Add the product to your enquiry and specify model, length, colour or colour code, slider, end configuration and quantity. Request continuous chain by length and finished zippers by piece count. A manager will confirm stock, price, minimum order and lead time.
Key parameters
- Product group
- standard
- Material in product name
- Metal
- Size in product name
- 4.2mm
- Format
- Zipper chain by the metre
- Tape material
- Polyester and cotton; proportions unspecified
- Teeth / coil material
- Brass M63
- Slider materials (catalogue)
- alloy ZnAl Z410
- Construction
- Metal zipper
- Manufacturer
- ALPHA TECHNOLOGY
- Manufacturer model
- VT0
- Tape width
- 26 ±1 mm
- Coil / tooth width
- 4.2 mm
- Chain material
- M63 brass
Verified specifications
- Standard slider, 2018 catalogue
- 23
- Slider / puller materials
- ZnAl Z410 / PVC
- End configurations, 2018 catalogue
- T — continuous chain without factory end stops; S — closed-end, one slider; R — separating
- Catalogue load class
- light; qualitative classification, not a working load limit
- Tape colours
- Select from the ALPHA colour card and a physical tape sample. The general manufacturer palette does not establish availability of every shade for every model.
- End-component materials
- M63 brass / ZnAl Z410
- Decorative pullers, 2018 catalogue
- 4, 10, 15, 18, 19, 20, 22, 46, 69, 88, 100, 113, 114, 115, 117, 150, 167, 171, 177, 179, 183, 184, 203, 204, 216, 226, 301, 302, 303, 304, 305, 350
- Catalogue length tolerances
- Up to 25 cm: ±0.5 cm; 26–100 cm: ±1 cm; 101–500 cm: ±1%; 501 cm and above: ±5 cm. These are tolerances, not a list of available lengths.
- Crosswise strength of the closed chain
- 30/38 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
- Separating connector attachment
- 6/9 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
- Closed-end stop strength
- 5/10 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
- Separating end strength
- 9/11 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
- Top-stop attachment
- 7/16 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
- Puller attachment
- 10/18 kg: standard requirement / ALPHA value; original manufacturer force notation, not a supported mass
- Colour codes in DELIM item records
- 100002, 100006, 100007, 100008, 100009, 100012, 100015, 110107, 110601, 110602, 120825, 130331, 131014, 135309, 141310, 141911, 150955, 160000, 161459, 163803, 171044, 171128, 171321, 171322, 175102, 180324, 181306, 183218, 184025, 191116, 191230, 191617, 191621, 191663, 191763, 191862, 193952, 194005, 194023, 194025, 194028, 194039, 194050, 194104, 194118, 196110. Recorded executions; this is not a stock availability statement.
- Standard website pullers, 24 September 2026
- 023
- Decorative website pullers, 24 September 2026
- 004, 010, 015, 018, 019, 020, 022, 046, 069, 088, 100, 110, 113, 114, 115, 117, 146, 150, 171, 177, 179, 183, 184, 203, 204, 216, 301, 303, 304, 305, 350
- Website end configurations, 24 September 2026
- T, S, R
- Website slider finish codes
- CNK, LAK, MBL, MDZ, MOS, NFR, NIK, OKS, PAT, SCN
- Slider finishes, 2018 catalogue
- CNK dark nickel; LAK lacquer; MBL polished brass; MOS brass; NFR nickel free; OKS oxide; PAT patina; SCN antique tin; MDZ copper. General palette; confirm compatibility with the model.
- Material
- M63 brass / Polyester / Cotton
- Size
- 4.2 mm
Technical documents and drawings
Applications and compatibility
- For mattresses.
- For sleeping bags.
- For pillows.
- Lightweight fabric products; the end configuration determines suitability for garments, bags or covers.
- Use compatible ALPHA sliders, chain and end components. Validate the sample in your own assembly before specifying production.