Murdock Barracks Belt 38 mm MultiCam webbing
Webbing Multicame
SKU · 6721AP38MMMCMXXR7
About this item
Barracks Belt 38 mm for belt manufacture
Murdock J6721AP38mm is MultiCam® belt webbing made from NYLON & POLY. The manufacturer sheet dated 26 February 2025 specifies Needle Loom construction and a Double Plain weave. Use article 6721AP38MMMCMXXR7 when ordering: it identifies Barracks Belt rather than another MultiCam webbing of the same width.
Width, thickness and hardware selection
Finished width is specified at 37–39 mm, with an average thickness of 2.3 mm. Check buckle and adjuster clearance against actual thickness, folded layers and seams. Use a sample to assess stiffness, slip and the behaviour of the assembled belt.
Breaking strength and application limits
The technical sheet lists a breaking strength of 3000 lbf, approximately 13.34 kN. This is not the working load limit of a finished belt or evidence of suitability for fall arrest or lifting. Finished-product strength also depends on seams, hardware and construction; this sheet is not a batch test report.
MultiCam and manufacturer technical information
MultiCam® is the only pattern listed in this sheet. The official Barracks Belt page also states Berry Amendment material compliance and conformity with Natick nIR requirements for MultiCam; no numeric nIR test report is included in the supplied PDF. The prepared image is an illustration based on the Murdock MultiCam family photograph. Confirm actual shade and pattern scale against a physical sample.
Order Murdock Barracks Belt from DELIM
Add the item to your basket and specify article 6721AP38MMMCMXXR7, required length, unit and application. The manufacturer lists 50-yard rolls (45.72 m). A manager will confirm availability, price, cut lengths, minimum quantity, sample options and lead time.
Key parameters
- Manufacturer
- Murdock Webbing Company, Inc.
- Model
- J6721AP38mm MultiCam® Barracks Belt
- Manufacturer article
- 6721AP38MMMCMXXR7
- Material
- Nylon and polyester (NYLON & POLY); fibre percentages not specified
- Colour / pattern
- MultiCam® — the only colourway in this sheet
- Nominal width
- 38 mm
- Average thickness
- 2.3 mm
- Breaking strength
- 3000 lbf ≈ 13.34 kN; not a working load limit
Verified specifications
- Construction
- Needle Loom
- Weave
- Double Plain
- Width Decimal field
- 1.4961 — original notation, equivalent to approximately 38 mm when expressed in inches
- Finished-width tolerance
- 37–39 mm
- Sheet thickness
- 2.3 average — average thickness 2.3 mm; no separate tolerance specified
- Pick density
- 36 picks per inch
- Sheet weight value
- 13.8 lbs/cyds — original unit retained; the document does not expand this abbreviation
- Finish
- Other — the specific treatment is not described
- Roll length
- 50 yards = 45.72 m; manufacturer roll format, not a DELIM minimum order
- Stated compliance
- Berry Amendment Compliant — manufacturer statement in the sheet
- Technical-sheet date
- 26 February 2025
- Document identifiers
- Analysis ID 5214; ID 25801
- Application
- Barracks Belt
- Size
- 38 mm
Technical documents and drawings
Applications and compatibility
- Manufacturing Barracks Belt waist belts and equipment webbing components to an agreed technical specification.
- Choose buckles and adjusters for the actual 37–39 mm width and 2.3 mm average thickness, allowing for folds and seams. The 6721 Barracks Belt and 6590 Backpack Weight series are not interchangeable merely because their nominal widths match.